[KwartzLab] Can we come visit on October 4th?
dscassel at gmail.com
Tue Aug 28 19:50:04 EDT 2012
We'd be thrilled to have you. And any help with the board mill would
be a fantastic bonus, thanks. :)
On Tue, Aug 28, 2012 at 5:34 PM, Thomas Flummer <flummer at labitat.dk> wrote:
> It's awesome that you will take time off to meet us. We are all really
> looking forward to this trip and it's gonna be interesting to talk to all of
> you and see some of the projects you are working on.
> I'll write back as we get a bit closer to make exact arrangements.
> Thomas Flummer
> flummer at labitat.dk
> doug moen wrote:
>> You can visit Kwartzlab on that date as long as you have a prior
>> arrangement with a Kwartzlab member to let you in. Under club rules,
>> you will be visiting as guests of that member.
>> I am a Kwartzlab member, and I am personally interested in meeting and
>> talking with you, and taking an hour off work to do this should not be
>> a problem. I am sure that other Kwartzlab members will also be
>> That said, it is a good idea to email me again, close to the date and
>> time you are coming, in order to confirm the meeting time.
>> Be seeing you.
>> Doug Moen (doug at moens.org)
>> On 28 August 2012 16:07, Thomas Flummer<flummer at labitat.dk> wrote:
>>> Hi fellow hackers!
>>> We are a little group of 3 guys from the danish hackerspace Labitat
>>> (http://www.labitat.dk), that are in the planning phase of a little road
>>> trip in the north-eastern part of the States, to visit a bunch of other
>>> We are starting out in New York, attending Open Hardware Summit
>>> 27th) and Maker Faire (September 29th and 30th), then driving up north on
>>> We would of course love to be able to stop by KwartzLab, maybe get a tour
>>> and not least have a chat about some of the cool projects you are working
>>> and how you run the space.
>>> We are staying in Toronto from Wednesday October 3rd to Thursday the 4th
>>> then driving towards Detroit in the morning. If it would be possible to
>>> by around noon or so on October 4th, that would be awesome. I know this
>>> not your normal "open house" evening, but we are hoping that we can still
>>> come visit and meet at least some of you.
>>> I just read on the mailing list archives that you got an LPKF PCB mill.
>>> have an operational LPKF Protomat C60 with a through hole plating system,
>>> also in operational state. If your haven't gotten it up and running yet,
>>> might be able to collaborate a bit and help out with info on our setup.
>>> Hope to hear back soon.
>>> Best regards,
>>> Thomas Flummer
>>> flummer at labitat.dk
>>> Discuss mailing list
>>> Discuss at kwartzlab.ca
>> Discuss mailing list
>> Discuss at kwartzlab.ca
> Discuss mailing list
> Discuss at kwartzlab.ca
More information about the Discuss