[KwartzLab] Vinyl Supplier

[doug moen]

The vinyl from asc365.com has been a huge disappointment. It's cheap,
it's Chinese, but it's not good.  The vinyl itself is not good
quality, and after a few months, the vinyl starts to peel (eg, on our
front door). The transfer film is also bad: it doesn't release
properly, and after a while, the vinyl becomes permanently stuck to
it. So I'd like to find a source of better quality vinyl and transfer
tape.

The MIT Fab Lab recommends sign vinyl from beacongraphics.com

I do not currently know of a local supplier of sign vinyl.  The
closest suppliers I can find in Google are in Burlington and Brampton.
 For example, these guys:
http://ags.allgraphicsupplies.com/Shop/Products/CutVinyls/CutVinyls.aspx?ID=108

Doug.

On 26 February 2012 12:15, Agnes Niewiadomski
<agnes.niewiadomski at gmail.com> wrote:
> Hi there
>
> I'm working on a custom wall mural for my nephew's room and need to find a
> local sign vinyl supplier. Ideally I would like to see what colours they
> have first, online if possible.
> I know Don has been sourcing us with some material for the plot cutter...I
> assume you get it locally Don? I'll be using the lab's cutter to cut most of
> the design, so I'm looking for the 24" rolls.
>
> Any help would be appreciated!
>
> Agnes Niewiadomski
>
> _______________________________________________
> Discuss mailing list
> Discuss at kwartzlab.ca
> http://kwartzlab.ca/mailman/listinfo/discuss_kwartzlab.ca
>