[KwartzLab] reprogramming the kwartzlab Kick
darin.white at rogers.com
Thu Nov 15 14:33:39 EST 2012
I'm trying to reprogram an awesome kwartzlab Kick minimal Arduino board from last year's Hacky Halloween. Hitting errors. Grateful for help from anyone who has tried this.
I'm using the hacked cable I documented here: http://www.kwartzlab.ca/2010/04/reverse-engineering-cheap-ardu/
I added the Kick board specs to boards.txt as outlined in the HH wiki. In the IDE, the board is set to that entry. Serial port correctly set to COM9, which has been configured 9600,8,N,1. And I've tried all options under Tools/Programmer. I'm getting the error "avrdude: stk500_getsync(): not in sync: resp=0x00", which googles up a ton of various causes. Anybody run into the same thing? Next, I'm going to add a switch to reset the device as I recall that being required with loading code on the original SoOnCon badges: specifically the timing of that reset.
Any help appreciated.
Darin White - http://makebright.com - dw at makebright.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Discuss