[KwartzLab] Can we come visit on October 4th?
flummer at labitat.dk
Wed Oct 3 19:17:42 EDT 2012
Sorry it's gotten this close, but we are actually in Toronto now, and if
it's still ok, we would love to stop by to have a look and talk a bit
with you guys tomorrow in the morning (what fit's you best... anything
between 9am and noon would work for us.
Again, sorry that this is a bit late, hopefully not too late.
flummer at labitat.dk
doug moen wrote:
> You can visit Kwartzlab on that date as long as you have a prior
> arrangement with a Kwartzlab member to let you in. Under club rules,
> you will be visiting as guests of that member.
> I am a Kwartzlab member, and I am personally interested in meeting and
> talking with you, and taking an hour off work to do this should not be
> a problem. I am sure that other Kwartzlab members will also be
> That said, it is a good idea to email me again, close to the date and
> time you are coming, in order to confirm the meeting time.
> Be seeing you.
> Doug Moen (doug at moens.org)
> On 28 August 2012 16:07, Thomas Flummer<flummer at labitat.dk> wrote:
>> Hi fellow hackers!
>> We are a little group of 3 guys from the danish hackerspace Labitat
>> (http://www.labitat.dk), that are in the planning phase of a little road
>> trip in the north-eastern part of the States, to visit a bunch of other
>> We are starting out in New York, attending Open Hardware Summit (September
>> 27th) and Maker Faire (September 29th and 30th), then driving up north on
>> We would of course love to be able to stop by KwartzLab, maybe get a tour
>> and not least have a chat about some of the cool projects you are working on
>> and how you run the space.
>> We are staying in Toronto from Wednesday October 3rd to Thursday the 4th and
>> then driving towards Detroit in the morning. If it would be possible to stop
>> by around noon or so on October 4th, that would be awesome. I know this is
>> not your normal "open house" evening, but we are hoping that we can still
>> come visit and meet at least some of you.
>> I just read on the mailing list archives that you got an LPKF PCB mill. We
>> have an operational LPKF Protomat C60 with a through hole plating system,
>> also in operational state. If your haven't gotten it up and running yet, we
>> might be able to collaborate a bit and help out with info on our setup.
>> Hope to hear back soon.
>> Best regards,
>> Thomas Flummer
>> flummer at labitat.dk
>> Discuss mailing list
>> Discuss at kwartzlab.ca
> Discuss mailing list
> Discuss at kwartzlab.ca
More information about the Discuss