[KwartzLab] Vinyl Cutter is fixed
agnes.niewiadomski at gmail.com
Sun Sep 29 16:19:55 EDT 2013
On Sun, Sep 29, 2013 at 3:09 PM, Ben Brown <ben at generik.ca> wrote:
> I got the vinyl cutter talking to the workstation again. Artcut had lost
> the settings for the machine, and the USB connector on the vinyl cutter
> itself is a POS (I re-soldered it, but is still wonky). I taped the cable
> up and it's working fine now.
> I added a troubleshooting section on the wiki entry:
> The main issue is the machine sometimes detects and sets up the cutter on
> a different COM port then what Artcut is set to. Artcut only sees COM1 and
> COM2, so the vinyl cutter can only run on COM2. The 'USB' option doesn't
> work at all.
> Discuss mailing list
> Discuss at kwartzlab.ca
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Discuss